Icom IC-FR6300

Spesifikasi Icom IC-FR6300

GENERAL
Frequency coverage330-400 MHz
Number of channels32 channels / 1 zone
Channel spacing6.25/12.5/25 or 7.5/15/30 kHz
(Varies according to version)
Type of emission16K0F3E*1 (25 kHz),
14K0F3E (20 kHz, EUR),
11K0F3E (12.5/15 kHz, USA),
8K50F3E (12.5 kHz),
4K00F1E/F1D (6.25/7.5 kHz)
Power supply requirement13.6 V DC (USA, CAN, EXP)
13.2 V DC (EUR, AUS)
Current drainTx High15.0 A maximum (at 50 W)
(at 13.6V DC)8.0 A maximum (at 25 W)
Rx Stand-by500 mA (FAN OFF)
Rx Max. audio1900 mA
DimensionsIC-FR5300/IC-FR6300483 × 88 × 260 mm, 19.0 × 3.5 × 10.2 in
(projections not included; W×H×D)UR-FR5300/UR-FR6300176×60×194 mm, 6.9 × 2.4 × 7.6 in
Weight (approx.)IC-FR5300/IC-FR63005.78 kg, 12.7 lb
UR-FR5300/UR-FR63002.1 kg, 4.6 lb
Operating temperature range-30℃ to +60℃, –22 °F to +140 °F (USA, CAN, EXP)
-25 ℃ to +55 ℃, –13 °F to +131 °F (EUR, AUS)
*1 25 kHz bandwidth is not available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25 kHz bandwidth.
TRANSMITTER
RF output power (Hi, L2, L1)50 W, 25 W, 5 W (USA, EXP, CAN, AUS Versions)
(Varies according to version)25 W, 10 W, 5.8 W (EUR, EXP Versions)
Spurious emissions80 dB typ. (TIA-603)
0.25 μW (≤ 1 GHz), 1.00 μW (> 1 GHz) (EN301 166, EN300 086)
Frequency stability±1.0 ppm or less
±0.1 ppm or less (corrected using GNSS)
Audio harmonic distortion0.8% typ. (AF 1kHz 40% deviation)(TIA-603)
0.8% typ. (AF 1kHz 40% deviation)(EN 300 086)
FM Hum and Noise72 dB typ. (W)
67 dB typ. (N)
RECEIVER
SensitivityDigital (1% BER)–3.5 dBμV (0.33 μV) emf typ. (EN301 166)
Analog (12 dB SINAD)–117 dBm (0.32 μV) typ. (TIA-603)
Analog (20 dB SINAD)–3.0/–3.0/0.0 dBμV emf typ. (W/M/N)(EN300 086)
Adjacent channelDigital63 dB typ. (EN301 166)
selectivityAnalog80/56 dB typ. (W/N)(TIA-603)
78/78/74 dB typ. (W/M/N)(EN300 086)
Spurious responseDigital85 dBμV emf typ. (EN301 166)
rejectionAnalog84 dB typ.(TIA-603)
81 dB typ. (EN300 086)
IntermodulationDigital78 dBμV emf typ. (EN301 166)
rejectionAnalog80/80 dB typ. (W/N)(TIA-603)
74/74/73 dB typ. (W/M/N)(EN300 086)
AF output power3.9 W typ. (at 5% distortion with a 4Ω load)
Measurements made in accordance with TIA-603, EN300 086 and EN301 166.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

StandardMIL-810 G
Method, Proc.
Low Pressure Storage500.5 I
Low Pressure Operation500.5 II
High Temperature Storage501.5 I
High Temperature Operation501.5 II
Low Temperature Storage502.5 I
Low Temperature Operation502.5 II
Temperature Shock503.5 I-C
Solar Radiation505.5 I
Humidity507.5 II
Dust Blowing510.5 I
Vibration514.6 I
Shock Functional516.6 I

All stated specifications are subject to change without notice or obligation.

Categories: , Tag: