Hytera RD988

Specifications Repeater Hytera RD988 Analog

General
Frequency			UHF1: 400-470MHz UHF2: 450-520MHz UHF3: 350-400MHz VHF: 136-174MHz
Channel Capacity			16
Channel Spacing			12.5kHz/20kHz/25kHz
Operating Voltage			13.6V±15%
Current Drain	Standby		<0.8A
	Transmit		<11A
Frequency Stability			±0.5ppm
Antenna Impedance			50Ω
Duty Cycle			100%
Dimensions (H×W×D)			88 X 483 X 366 mm
Weight			8.5 kg
LCD Display			220*176 pixels, 262000 colors 2.0 inch, 4 rows
Transmitter
RF Power Output			5-50W
FM Modulation			11K0F3E @ 12.5kHz 14K0F3E @ 20kHz 16K0F3E @ 25kHz
4FSK Digital Modulation			12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission			-36dBm <1GHz -30dBm >1GHz
Modulation Limiting			±2.5 kHz @ 12.5 kHz ±4.0 kHz @ 20 kHz ±5.0 kHz @ 25 kHz
FM Hum & Noise			40dB @ 12.5 kHz 43dB @ 20 kHz 45dB @ 25 kHz
Adjacent Channel Power			60dB@12.5kHz 70dB@20 /25kHz
Audio Response			+1 ~ -3dB
Audio Distortion			≤3%
Digital Vocoder Type			AMBE++ or SELP
Digital Protocol			ETSI-TS102 361-1,-2,-3
Receiver
Sensitivity		Analog	0.3μV (12dB SINAD) 0.22μV (Typical) (12dB SINAD) 0.4μV (20dB SINAD)
		Digital	0.3uV/BER5%
Adjacent Channel Selectivity TIA-603 ETSI			65dB @ 12.5 kHz ；75dB @ 20/25 kHz 65dB @ 12.5 kHz ；75dB @ 20/25 kHz
Intermodulation TIA-603 ETSI			75dB @ 12.5/20/25 kHz 70dB @ 12.5/20/25 kHz
Spurious Response Rejection TIA-603 ETSI			80dB @ 12.5/20/25 kHz 80dB @ 12.5/20/25 kHz
Blocking TIA-603 ETSI			90dB 90dB
Hum and Noise			40dB @ 12.5kHz 43dB @ 20kHz 45dB @ 25kHz
Rated Audio Power Output			0.5W
Rated Audio Distortion			≤3%
Audio Response			+1 ~ -3dB
Conducted Spurious Emission			<-57dBm

All specifications are subject to change without notice due to continuous development.

There are no reviews yet.